Water for Injection Equipment features:
(1)The whole equipment is made of 316L stainless steel, the working surface accept pickling and passivation treatment.
(2)The pipeline system uses a mirror polished 0.6 316L mRa stainless steel pipe, automatic track welding, clean flange and pharmaceutical grade gasket connection
(3)The insulation rock wool, coated 304 stainless steel polishing treatment protective layer, the frame body is made of stainless steel.
(4)Adopting integrated electric heating design, no need of industrial boiler, producing water for 100L/h~ 500L/h. Full automatic touch screen control. Distilled water can be produced at any time. The double-tube plate evaporator adopts the unique patented heat recovery technology. The power unit output is 5 times that of the ordinary electric heating distilled water machine under the same unit power consumption, and the energy saving effect is very remarkable. It is the most advanced technology product in the industry.
(5)According the latest international pharmacopoeia and FDA, cGMP standards to design and manufacture.
S type distilled water machine
(1) All parts in contact with raw water are 316L low carbon stainless steel.
(2) Structural design:
◆Vertical circulation evaporator.
◆ No dead ends of healthy structure and connections.
◆ Pipeline slope is conducive to minimum emissions.
◆The system uses the original water pump to make the operation stable, compact and cost-saving.
◆Removable structure, the entire heat exchanger tube can be replaced, or it can be replaced separately.
(3) The instrument automatically detects the quality of the product and automatically discharges it.
(4) According to the standard procedure of pickling and passivation treatment, work according to the requirements of electropolishing.
(5) External heaters, condensers and I-Effect evaporators, with double tube plate design, effectively eliminate the leakage of the media, and effectively eliminate the system at different media levels.
(6) The surface is encapsulated with an insulating layer and 304 material to protect the working environment.
(7) There are no moving parts on the equipment, the operation state is quiet, safe and reliable.
(8) Simulate and test the actual working environment according to the determination procedure throughout the test workshop.
(9) Provide a draft project cycle document certification and verification document from the design stage to the SAT site.
(10) Designed and manufactured according to the latest International Pharmacopoeia and FDA, cGMP standards.